Combination forced-air and forced-hot-water (hydronic) distribution systems include standard forced-air heating and cooling capabilities, as well as combination units that provide hydronic distribution for operations such as radiant floor and fan coils.

Products:
DualTEK™ | Invision3™

Quick tip: click the links above to quickly jump to a specific product below on this page.

ECONAR GeoSource DualTEK™ Combination Forced-Air/Hydronic 3- to 6-Ton Heat Pumps

Provides heating, cooling, and hot water

Provides all the capabilities of a standard forced-air geothermal heat pump, with heating and evaporative cooling to an air stream

Creates hot water for any number of hydronic heating applications

Effectively handles 100% of the heating and cooling needs of your residence or business

Popularly used for radiant floor heating, snowmelt systems, pools and hot tub heating, as well as many other water-heating tasks

The system runs completely on electrical energy, allowing for a zero-emissions system when green electricity is supplied

ColdClimate™ technology allows output temperatures 5° to 10º warmer than competitive systems

 

back to top

ECONAR GeoSource Invision3™ Dual-Circuit System

The ultimate heat pump — a sophisticated, versatile workhorse

Customizable to provide 100% heating, 100% cooling, and 100% hot-water needs of an average family and can even include radiant-floor applications

All system components can be positioned for easy accessibility, allowing your heat pump to have “zero clearance” with surrounding walls

Two separate compressors run independent of each other, creating an extremely versatile, reliable, and efficient system

Two circuits operate independently, providing two heat pumps in one. Operate heating or air-conditioning on one stage while simultaneously operating a water heater on the second stage. When water heating is not required, that circuit becomes a second stage, providing additional heat for colder weather

Options include two stages of heating with one stage of cooling and full-time domestic hot water heating

Simultaneously heats or cools in forced-air mode while heating water with the domestic hot-water option

Customized Design – If cooling needs are greater than hot-water needs, a unit can be ordered with two stages of heating and two stages of cooling

Energy Efficient – Adjusts to accommodate changing heating and cooling demands, delivering the correct amount of energy to meet your needs, at the best efficiency possible

Domestic hot-water option has a greater recovery rate over a standard electric water heater, and is 300% more efficient

Two stages allow for independent circuit backup and does not require strip heat or conventional backup

Allergy Gold permanent washable filter included

An Electronic Digital (LCD) 3-heat, 2-cool thermostat included

Air Pad included

Overflow sensor included

Variable-speed DC blower for comfortable, efficient operation

Technology allows for lower electrical usage during peak times

Sophisticated electronic controls with diagnostics

Double-wall potable-water full condensing coil

Scroll compressors provide quiet operation

Baked-on epoxy over galvaneal cabinet

High- and low-access valves

Thermostatic valve controller

Every unit real-time run tested

PumpPAK ready

Small footprint

ETL Safety certified

ARI Performance certified

 

back to top

Geothermal for Forced-Air Systems

Geothermal for Forced-Hot-Water Systems

Wood-pellet boilers

Direct-vent "tankless" water heaters